Contact Us
3D CAD STP or SolidWorks models for most designs can be supplied upon request.
 
  • Solder Cup Pin Seals

    Higher leak test pressures are available upon request for most designs with leak testing with either nitrogen or helium, as the 80 psi or vacuum leak test or other pressure test value shown on many drawings is only a default leak test value and not usually a maximum pressure test rating which can be much higher. Most designs will also seal bi-directionally for either pressures or vacuums. Check with PAVE sales engineering to request higher pressure leak testing or pressure testing in opposite direction shown from the drawings. Cutting the wire length shorter has no effect on the seal integrity.

    Higher voltage testing is available upon request for most designs.

    Lower temperature ratings can be achieved in most cases by simply changing the o-ring compound to an o-ring with a lower operating temperature rating. Check with PAVE sales engineering or an o-ring supplier for recommended alternate o-ring compounds.

    Use your keyboard's shortcut ctrl+ F buttons to bring up your browser's find dialog box to then enter and go directly to a particular part-drawing #.

    PAVE DESCRIPTION CODES CHART

    Download
    Housing Specifications

    Installation Port Seal Total Wires/Pins PAVE Description Codes, Housing & Wires AWG # DRAWING #
    1/16" NPT hermetic header 1 PT1-SS-80-1-#12/TE18-.3-24 18 2096
    ¼" NPT hermetic header 1 PT4-B-200-1-20-SC-SC 20 3550
    5,08mm laser weld hermetic header 2 LWT4-IN-200-2-18-0-.4 laser weld 18 3741
    ⅜" SAE o-ring hermetic header 1 SO6-SS-150-1-(2-56F)-SC 20 4657
    ⅛" NPT hermetic header 2 PT2-B-150-2-TEE24-SC-6 24 1438
    ½" SAE hermetic header 2 SO8-SS-150-2-TE20-10-SC 20 3133
    7.82mm piston o-ring piston o-ring 2 SP5X-E-200-2-18-.2-.2 18 4732
    7.82mm piston o-ring solder cups 2 SP5X-E-200-2-26-SC-SC 26 4460
    ⅜" piston o-ring hermetic header 2 SP6-E-200-2-24-T 24 1847
    ½" piston o-ring hermetic header 2 SP8H-E-200-2-20-SC-SC 20 3327
    ½" piston o-ring hermetic header 2 SP8S-E-150-2-TZ22-120-SC 22 4716
    ½" piston o-ring hermetic header 2 SP8S-E-150-2-TE22-18-3PINS(MOLEX) 18 2384
    ¾" piston o-ring hermetic header 2 SPF12-E-150-2S-TEE8-1.5M-LUG 22 3128
    ½" SAE hermetic header 3 SO8-SS-150-3-PC24-12T-SC 24 2066
    ⅜" SAE hermetic header 4 PT6-SS-80-4-TE26-8-SC 26 0953
    ½" piston o-ring hermetic header 5 SP8S-E-150-5-TZ22-80-SC 22 2208
    11,13mm piston o-ring hermetic header 5 SP7-E-200-5-22-PIN-PIN 22 4389
    ¾" piston o-ring passthrough 5 SPF12-E-200-3/2-16/22-SC-SC 16 & 22 4723
    Custom 2" flange hermetic header 6 FL-AL-150-6-TE18-PIN-12 18 3139
    ¾" SAE Thread hermetic header 6 SO12-SS-150-6-TEE18-8-SC 18 3630
    ¾" SAE o-ring thread hermetic header 6 SO12-SS-150-6-TEE22-8-SC 22 4968
    0.5550" piston o-ring hermetic header 6 SPF9-E-80-6-20-SC-SC 20 1990
    ¾" o-ring face seal wires & PCB pins 6 VS12-SS-150-6-TE24-4-PCB 24 4801
    ¾" piston o-ring hermetic header 8 SPF12XS-E-200-8-22-PIN-PIN 22 3679
    ½" piston o-ring hermetic header 9 SP8M-E-150-9-22-SC-sc REV JOI-9 SOC! 22 0207
    ½" piston o-ring hermetic header 9 SP8M-E-150-9-22-SC-SC 18 4538
    ¾" piston o-ring hermetic header 12 SPF12-E-200-12-22-SC-SC 22 1962
 
 
  • Solder Cup Pin Seals

    Most PAVE hermetic seals are bi-directional seals for vacuum or pressure.

    #20 AWG or smaller Pins on either one or both sides for low or high pressures and vacuum hermetic header seal in small diameter seals.

 
 

  • Solder Cup Pin Seals

  • SPF-12
 

2751 Thunderhawk Court ♦ Dayton, OH 45414 ♦ United States ♦ +1 (937) 890-1100 x103 tech support ♦ +1 (937) 890-5165 (fax)

PAVE Technology Co.® is located 8 miles south of the Dayton Intl. Airport (DAY) and the nearby US Air Force Museum.