PAVE hermetic seals and bi-directional and will seal both pressure and vacuum in either or both directions. For pressures above 300 psi (20 bar), please check with the sales engineer if changing the pressure direction shown on the drawing.
A wide range of either UL 1203 Wires threaded NPT or metric or non-threaded cylindrical metal sleeves, explosion-proof sealed line bushings are available to ATEX, FM, UL and CSA certifications using an almost unlimited choice of wires, cores or cable types, both electrical and fiber optic. -55C to 90C or 200C. EN 60079-0 and EN 60079-1 standards. See below existing line bushing designs with new designs available upon request. PAVE offers hazardous location sealing cable fittings that are explosion-proof, water and oil-tight, dust-ignition proof NPT threaded plated iron alloy ES sealing hub that are potted epoxy electrical wire assemblies. Recognition is available to the requirements for following standards for PAVE-Seal® 200FR hermetic epoxy seals:
- UL 1203, UL 60079-0,-1,-7
- UL94V-O flame retardant
- CAN/CSA C22.2, B60079-7
- TI value of 90
UL File Number: E319608
- UL 1203 – STANDARD FOR EXPLOSION-PROOF AND DUST-IGNITION-PROOF ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS – Edition 4 – Issue Date 2000-09-01
- UL 60079-7 – ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES – PART 7: INCREASED SAFETY ‘E’ – Edition 2 – Issue Date 2007-03-09
- CSA C22.2 NO. 30 – EXPLOSION-PROOF ENCLOSURES FOR USE IN CLASS I HAZARDOUS LOCATIONS – Edition 1 – Revision Date 2003-01-01
- CSA C22.2 NO. 25 – ENCLOSURES FOR USE IN CLASS II, GROUPS E, F AND G HAZARDOUS LOCATIONS (1966 EDITION) – Edition 1 – Issue Date 1966-09-01
- CENELEC EN 60079-0 – ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES PART 0: GENERAL REQUIREMENTS-IEC 60079-0:2004 – Edition 1 – Issue Date 2006-07-01
- CENELEC EN 60079-1 – EXPLOSIVE ATMOSPHERES – PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES “D” – Edition 1 – Issue Date 2007-07-01
- CENELEC EN 60079-7 – ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES. PT. 7, INCREASED SAFETY “E” – Edition 1 – Issue Date 2007-01-01
Use your keyboard’s shortcut ctrl+ F buttons to bring up your browser’s find dialog box to then enter and go directly to a particular part-drawing #.
| Installation Port or Size | Wire Insulation | Hermetic Seal | Number of Wires | AWG # | PAVE Description Codes, Housing & Wires | PART-DRAWING # |
|---|---|---|---|---|---|---|
| M16 | pvc | ATEX Feedthru | 4 | 22 | M16-B-150-4-PC20-300-300mm ATEX | 3352 |
| ½ NPT | PTFE | feedthru | 4 | 22 | PT8TF-SS-200-4-TEE22-24-2 | 3373 |
| 1/2″ mNPT | PTFE | feedthru | 5 | 1 #18 4 #22 | PT8XL-SS-200UL94-1/4-TE18/22-5 | 5140 |
| 1/2″ mNPT | PTFE | feedthru | 7 | 1 #18m 2 #29 @ #27 2 coax | PT8XL-SS-200UL94-1/2/2/2-TE18/20/28/COAX-75-10 | 5141 |
| 1/8″ mNPT | PTFE | feedthru | 5 | 3 #18 2 #28 | 3 #18 2 #28 | 5142 |
| 1″ | PTFE | feedthru | 4 | PTES31-SG-200-3/1-EE22/RG303 | 0765 | |
| 1″ | PTFE | feedthru | 7 | 22 | ES31-SG-200-7-E22-24-51 | 0769 |
| Custom piston o-ring | PTFE | feedthru | 7 | 28 | FL0712-AL-150-7-EE24-8-24 EXP. PROOF | 0710 |
| M24 | pvc | feedthru | 8 | 20 | M24-V-105-8-HARM20-6-5 | 1204 |
| 1″ NPT | PTFE | feedthru | 8 | PTES31-SG-200-6/2-EE22/RG303-X-Y | 0771 | |
| M24 | pvc | feedthru | 12 | 20 | M24-AL-150-12-HARM20-3-4 | 0840 |
| M24 | pvc | feedthru | 12 | 20 | M24-V-105-12-HAR20-6-5 | 1512 |
| 1¼” NPT | SOOW | feedthru | 12 | 14 | PTN20-PS-200FR-CO9412-54-6 | 1137 |
| 15mm piston seal | PTFE | feedthru ATEX | 15 | 26 | SPF9.5-E-200FR-3/12-EE22/26-16-16 ATEX | 3749 |
| 15mm piston seal | PTFE | feedthru ATEX | 15 | 26 | SPF8.5-E-200FR-3/12-PC22/26-13SR-12 | 3755 |
| M40 piston o-ring seal | Kapton | passthru | 50 | 50 | ATEX flex cable circuit seal | 3684 |
| Kapton Polyamid | piston o-ring | 160 | SP21.5-E-200FR-2-FLEX ATEX | 3745 |
